|
This parametric manipulation was created through the limitations of site, the need for self supporting structural integrity, the use and the restrictions of fabrication processes during production. The ultimate form is therefore created through a system of analysis where the most efficient form was deduced using the parametric system. Most of the theatre was prefabricated and assembled off site. The elongated diamonds were designed to be produced from a single flat piece of polycarbonate minimising both manufacturing times and wasted materials. Each of the 500 pieces was CAM cut, before being folded into three dimensional forms with points drilled to connect each of the diamond forms. The entire structure could then be assembled by connecting the panels using simple tools. The use of simple hand tools meant that the theatre could rapidly be assembled and dissembled, suitable to the temporary nature of the structure, it was imperative that the structure could not only be dissembled, but left no permanent trace of its construction on the carpenter centre. This again was made possible through the use of parametric design. Each panel is 3" in depth and spans over 15" at the centre; they were stiffened with a foam insert to help with rigidity with the combination of strategic panels being placed inside out, thus acting as key stones. These strategic inside out keystone panels also act as skylights, allowing light to travel both in to and out of the theatre. When assembled the panels dissipate forces around the skin of the theatre, creating the self supporting monocoque structure. The monocoque structure mean that mo permanent fixings or structural supports had to be made with the Carpenter Centre, therefore the puppet theatre became connected through its relevance as a design but remained separate as a structural object. With the puppet theatre sitting in a sunken exterior courtyard underneath the Carpenter Centre, the change in level of 1.25m between the street side and the courtyard had to be addressed, and so this became one of the key parameters in the design. This was overcome by incorporating the 1.25m change in level in to the raked theatre seating, with the actual performance stage sitting at the lower level of the courtyard. As you enter the puppet theatre at street level, the elongated diamond forms combine with the change in height and almost surreal sizing of the puppet theatre itself to creating a visual illusion, a false perspective. This invites the visitor into the theatre with a sense of magic and curiosity, drawing the eyes towards the stage end where the parametric boundary lines of the diamond forms stop abruptly with the introduction of the stage. The use of this optical illusion helps to reinforce the sense of theatre, a sense of magic that I feel could be easily have been missed or overlooked with the use of other materials or construction techniques. You could maybe say that similar forms could have been created in concrete or wood, but then the all important play of light created by the polycarbonate panels chosen would have been missed. With the combination of material and parametric design "theatre" is actually incorporated into the design of the structure. The Glossy polycarbonate panels also reflect light, creating an ambient glowing light during performances, with the only lighting coming from the puppet show itself, this transforms the theatre into a glowing lantern at night, projecting it's energy onto the bare barren concrete surfaces of the Carpenter Centre. It seems to work well in a juxtaposition between the high-tech nature of the design and the connection created with what is a very ancient form of entertainment, connected by lighting which would seem to draw you in a similar way to that of a candle light. During the day the reflectance is reversed when the natural light brings the exterior surroundings into the puppet theatre, this focuses the attention on what is happening in the outside world, the walls almost become the walls of an aboriginal cave, telling the stories of the exterior world as they are happening. This connection to the outside world through the reflectance of light is reinforced by the framing of a single tree which sits beyond the entrance of the theatre. It frames the view with some purpose whilst creating a sense that the tree could possibly ask as some barrier, a limit to the boundary of the theatres threshold. |
Remove me from list 1225 Descanso st san Luis Obispo Ca 93405-4801 |
No comments:
Post a Comment
Keep a civil tongue.